|
Model 51080 Bi-Directional Amplifier
Extends CoverageThe Model 51080 in-building amplifier provides amplification of both uplink and downlink wireless signals in facilities located within reasonable proximity of cell sites and where wireless coverage is otherwise non-existent. Typical ApplicationsAmong facilities that can benefit from an in-building amplifier installation are parking garages, warehouses, basements, shielded structures, metal buildings, office complexes, campus environments, hospitals, and convention centers. Specifications| Gain* |
|
| 80 dB | | Linear Output Power (typical) |
|
| | Cellular |
|
| | SMR 700 MHz***
|
|
| 26 dBm | PCS |
|
| | | Noise Figure (Typical) |
|
| 5.5 | | AGC Dynamic Range |
|
| 25 dB | | Propagation Delay |
|
| <250 nsec | | Gain Adjustment Range |
|
| 0-30 dB, 1 dB Steps | | Power Requirements |
|
| | Single/Full Band |
|
| 120 Vac @ 1.3A | Dual Passband/Dual Band |
|
| | | Dimensions/Weight |
|
| | Single Band |
|
| 12.38" x 12.6" x 6.21" / 18 lbs
(314.4 x 320.0 x 157.7 mm / 8.16 Kg) | Dual Passband/Dual Band |
|
| 16.6" x 17.88" x 7.68" / 19.8 lbs
(421.6 x 454.1 x 195.0 mm / 8.98 Kg) | Dual Passband Notch** |
|
| Special Configuration | Connectors
|
|
| N-Female |
* 75 dB of gain for Dual Band PCS/PCS units.
**Separate mounting for notch filters required. Contact CSI for configuration information.
***SMR 700 units are not available in dual band combinations. Specifications subject to change without notice.
Copyright Cellular Specialties, Inc. -021-0000-001 REV F
 Product & Services FAQ
  back to top
|
