PDF Version

Model 51062 Bi-Directional Amplifier

Extends Coverage

The Model 51062 in-building amplifier provides amplification of both uplink and downlink wireless signals in facilities located within reasonable proximity of cell sites and where wireless coverage is otherwise non-existent.

Typical Applications

Among facilities that can benefit from an in-building amplifier installation are parking garages, warehouses, basements, shielded structures, metal buildings, office complexes, campus environments, hospitals, and convention centers.

Specifications

Gain	65 dB
Linear Output Power (typical)
Cellular	25/27 dBm
SMR 700 MHz*** SMR 800-900 MHz	27 dBm 25/27 dBm
PCS	21/22 dBm
Noise Figure (Typical)	5.5
AGC Dynamic Range	25 dB
Propagation Delay	<250 nsec
Gain Adjustment Range	0-30 dB, 1 dB Steps
Power Requirements
Single/Full Band	120 Vac @ 500mA
Dual Passband/Dual Band	120 Vac @ 1.3A
Dimensions/Weight
Single Band	12.38" x 12.6" x 6.21" / 18 lbs (314.4 x 320.0 x 157.7 mm / 8.16 Kg)
Dual Passband/Dual Band	16.6" x 17.88" x 7.68" / 19.8 lbs (421.6 x 454.1 x 195.0 mm / 8.98 Kg)
Dual Passband Notch**	Special Configuration
Connectors	N-Female

* 75 dB of gain for Dual Band PCS/PCS units.
**Separate mounting for notch filters required. Contact CSI for configuration information.
***SMR 700 units are not available in dual band combinations.

Specifications subject to change without notice.
Copyright Cellular Specialties, Inc. -021-0000-001 REV F

back to top